newbie1994 on Data on fields not displayed

Hi,

My private channel shows that there are entries but none of them are being shown on the graph. Please help me!!

Channel ID: 112736

Code:

#include <SPI.h>
#include <Ethernet2.h>

int thresholdUp = 400;
int thresholdDown = 250;
int sensorPin = A0;
int lightPin = A2;

// Local Network Settings
byte mac[] = { 0x90, 0xA2, 0xDA, 0x10, 0x6C, 0xB6 }; // Must be unique on local network

// ThingSpeak Settings
char thingSpeakAddress[] = "api.thingspeak.com";
String writeAPIKey = "RR5F13P7V4ZHG21N";
const int updateThingSpeakInterval = 2 * 1000; // Time interval in milliseconds to update ThingSpeak (number of seconds * 1000 = interval)

// Variable Setup
long lastConnectionTime = 0;
boolean lastConnected = false;
int failedCounter = 0;

// Initialize Arduino Ethernet Client
EthernetClient client;

void setup()
{
// Start Serial for debugging on the Serial Monitor
Serial.begin(9600);

// Start Ethernet on Arduino
startEthernet();
}

void loop()
{
int moisture = analogRead(sensorPin);

Serial.print("Moisture = ");
Serial.println(moisture);

int light = analogRead(lightPin);

Serial.print("Light = ");
Serial.println(light);

delay(500);

// Print Update Response to Serial Monitor
if (client.available())
{
char c = client.read();
Serial.print(c);
}

// Disconnect from ThingSpeak
if (!client.connected() && lastConnected)
{
Serial.println("...disconnected");
Serial.println();

client.stop();
}

// Update ThingSpeak
if(!client.connected() && (millis() - lastConnectionTime > updateThingSpeakInterval))
{
updateThingSpeak("field1="+ sensorPin);
//updateThingSpeak("field2="+ lightPin);
}

// Check if Arduino Ethernet needs to be restarted
if (failedCounter > 3 ) {startEthernet();}

lastConnected = client.connected();
}

void updateThingSpeak(String tsData)
{
if (client.connect(thingSpeakAddress, 80))
{
client.print("POST /update HTTP/1.1
");
client.print("Host: api.thingspeak.com
");
client.print("Connection: close
");
client.print("X-THINGSPEAKAPIKEY: "+writeAPIKey+"
");
client.print("Content-Type: application/x-www-form-urlencoded
");
client.print("Content-Length: ");
client.print(tsData.length());
client.print("

");

client.print(tsData);

lastConnectionTime = millis();

if (client.connected())
{
Serial.println("Connecting to ThingSpeak...");
Serial.println();

failedCounter = 0;
}
else
{
failedCounter++;

Serial.println("Connection to ThingSpeak failed ("+String(failedCounter, DEC)+")");
Serial.println();
}

}
else
{
failedCounter++;

Serial.println("Connection to ThingSpeak Failed ("+String(failedCounter, DEC)+")");
Serial.println();

lastConnectionTime = millis();
}
}

void startEthernet()
{

client.stop();

Serial.println("Connecting Arduino to network...");
Serial.println();

delay(1000);

// Connect to network amd obtain an IP address using DHCP
if (Ethernet.begin(mac) == 0)
{
Serial.println("DHCP Failed, reset Arduino to try again");
Serial.println();
}
else
{
Serial.println("Arduino connected to network using DHCP");
Serial.println();
}

delay(1000);
}